1. Adopt single feedback to control the feeding technology, eliminating the problems of PLC signal acquisition lag, slow running speed, poor anti-interference performance, etc., increasing speed feedback, higher feeding accuracy and stability.
2. The feeding part is easy to disassemble and easy to clean, replace and maintain.
3. Different models adopt universal screw interface, which can easily replace different types of screws to achieve a wider feeding range of one device.
4. Accuracy can reach ±0.5%.
product description:
1. Adopt single feedback to control the feeding technology, eliminating the problems of PLC signal acquisition lag, slow running speed, poor anti-interference performance, etc., increasing speed feedback, higher feeding accuracy and stability.
2. The feeding part is easy to disassemble and easy to clean, replace and maintain.
3. Different models adopt universal screw interface, which can easily replace different types of screws to achieve a wider feeding range of one device.
4. Accuracy can reach ±0.5%.
Parameters Table:
model | Feeding amount(KG/H) | motor | Weighing platform | Material contact Partial material | Seal material | hopper(L) |
LW-RS45 | 5-150 | 0.75KW, AC 380V, 3Ph,IP55 | SCS 100KG, 150KG,IP65 | 304 stainless steel | Silicone Rubber Ding Qing rubber PTFE | 40/80 |
LW-RS70 | 150-800 | 0.75KW, AC 380V, 3Ph,IP55 | SCS 150KG,200KG, IP65 | 304 stainless steel | Silicone Rubber Ding Qing rubber PTFE | 80/120 |
LW-RS100 | 500-1500 | 1.5KW, AC 380V, 3Ph,IP55 | SCS 300KG IP65 | 304 stainless steel | Silicone Rubber Ding Qing rubber PTFE | 80/120 |
Remarks:
The output is measured by a fluid material, and the feed amount will vary according to the actual material specific gravity and other characteristics.
The actual feeding amount needs to be measured according to the corresponding materials. The specific technical parameters are consulted by the company personnel. If there is any change, no further notice will be given.